• CT4, Tòa nhà Vimeco, Nguyễn Chánh, Cầu Giấy, Hà Nội
  • info@sbc-tt.com
    • HOTLINE TƯ VẤN
    • Tư vấn kỹ thuật sơn: 0934518468 (Ms. Thoa)
    • Tư vấn bán hàng Sơn:0967061678 (Mr. Thành)
    • Tư vấn sàn sp deck: 0941460336 (Mr.Ninh)
    • Tư vấn tôn lợp: 0916688189 (Mr. Hiếu)
  • Việt Nam English

SP ® SEALER EPOXY PRIMING FLOOR PAINT

MSP:

Product Description

  • Excellent absorption properties, ensuring high adhesion to floor paints and most types of mortar surfaces.
  • Durable with water, solvents, chemicals.
  • Can be applied directly to high humidity concrete surfaces.

Concrete surfaces: Dust and impurities must be cleaned, grease removed by solvent or mild detergent. It is possible to spray high pressure water on the outdoor surface to remove dirt.

Fill cracks or flatten the surface with appropriate material. The surface should have a good roughness to ensure good adhesion. Surface moisture content ≤ 4%.

  • Stir lightly, base part (part A) and part B by stirrer. Slowly pour the curing portion (part B) into the container has part A at a rate of 1 part A and 1 part B. Stir for about 3 minutes.
  • Ambient temperature range from 10 - 350C.
  • The mixture should be used immediately, not to exceed 30 minutes at 230C.
  • SPTHINNER 300 or 305 can be used for thinning if necessary, not more than 2% by volume.
  • Cleaning tools and equipment after application with SPTHINNER 300 or SPTHINNER 305.
Color:

colorless

Solid content:

min 85%

proportion:

6 – 8 m2/kg/ 100µm (depending on surface conditions)

Theoretical coverage:

1.12 ± 0.05 g/ml

Film thickness:

Wet thickness: 125 μm

Dry thickness: 100 µm

dried(23°C):

toucgable dry 7h

hard dry 16h

Time coating layer (23°C):

minimum after 16h

Diluent:

SP THINNER 300 or 305

Sản phẩm liên quan

Contact Us

The product you are interested in

Product's name:

Code: