CT4, Tòa nhà Vimeco, Nguyễn Chánh, Cầu Giấy, Hà Nội 
info@sbc-tt.com 
.png)
Fireproof paint
Tư vấn sản phẩm
Liên hệ đại lýSP®FIRESHIELD - FS1
MSP:
Product Description
- Characteristic
- Surface preparation
- Construction
· One component paint, naturally fast drying so easy to use and save.
· The flexible paint film should not be easily cracked or damaged by the rain like water-based paint which is suitable for construction right at the factory and erection on the construction site.
· Excellent adhesion on metal surfaces as well as on primer surfaces.
· Special solvent system helps paint film dry quickly, save construction time.
· Fast to achieve thickness and easy construction with basic equipments.
· Protecting the structure of the building from melting and collapsing when the flame temperature is higher than 1000°C.
- The painting surface should be dry, clean, free from any other impurities. Metal surface should be treated in accordance with ISO 8504.
- For surface of new untreated steel: Grade of cleanliness is Sa 2.5 (ISO 8501-1: 1998). Mechanical cleaning up to the minimum standard of St2 (ISO 8501-1: 1998) may be acceptable depending on the intended use.
- For temporary primer-coated steel surfaces: The appropriate temporary primer coat surfaces should be clean, dry, free from contamination and free of any foreign matter, such as oil and grease.
- For surface had old painting layer: The appropriate primer must be dry, clean and free from decomposition.
• SP®FIRESHIELD - FS1 paint coating should be applied directly onto the steel surface or the anti-rusted primer therefore to ensure adhesion as well as properties of flame resistance paint, metal surfaces need to be coated with anti-rusted primer as recommended by the SP paint manufacturer.
• Please contact the supplier for advice.
- The working surface temperature must be at least 100C and 50C above the dew point of the air. Working environment moisture ≤ 95%.
- The construction area must be well ventilated.
- Drying time depends on temperature, humidity, ventilation level of construction environment. High temperature and good ventilation helps to dry faster.
- Stir well before applying. Only mix up to 5-10% SP®THINNER 500 if necessary.
- Can use spray gun, brush or roller.
- Use the right ratio and type of solvent recommended by the supplier.
- When applying spray gun, use airless spray gun with high spray pressure, from 3000 - 7000 psi. Equipment after construction must be washed with a suitable solvent.
| Color: | Blurred white |
| Solid content: | 72 ± 5 % |
| proportion: | 0.5 kg/m2/ 250µm (depending on surface condition) |
| Theoretical coverage: | 1.25 ± 0.05 g/ml |
| dried(23°C): | Touchable dry 30 minutes Hard dry 24h |
| Time coating layer (23°C): | Minimum after 1h |
| Diluent: | SP®THINNER 500 |
.png )
.png&description=SP®FIRESHIELD - FS1){kind=link}