• CT4, Tòa nhà Vimeco, Nguyễn Chánh, Cầu Giấy, Hà Nội
  • info@sbc-tt.com
    • Tư vấn kỹ thuật sơn: 0934518468 (Ms. Thoa)
    • Tư vấn bán hàng Sơn: 0973883409 (Mr. Quyền)
    • Tư vấn sàn sp deck: 0941460336 (Mr.Ninh)
    • Tư vấn tôn lợp: 0916688189 (Mr. Hiếu)
  • Việt Nam English



Mô tả Sản phẩm

  • High adhesion.
  • Durable with petroleum, sea water, fresh water, chemicals, climate.
  • High heat resistance. This paint can be used for heated surfaces up to 1100C.

The surface should be dry, clean, free of any other impurities. The surface should be assessed and treated

in accordance with ISO 8504.

For surface of new untreated steel: Grade of cleanliness is Sa 2.5 (ISO 8501-1: 1998). Mechanical cleaning up to the minimum standard of St2 (ISO 8501-1: 1998) may be acceptable depending on the intended use.

For temporary primer-coated steel surfaces: The appropriate temporary primer coat surfaces should be

clean, dry, free from contamination and free of any foreign matter, such as oil and grease.

For surface had old painting layer: The appropriate primer must be dry, clean and free from decomposition.

  • Stir the base part (part A) with a stirrer. Slowly pour the curing portion (part B) into the container has part
  • A at a rate of 10 parts A and 1 part B. Stir evenly for 3 minutes until the mixture is homogeneous.
  • Use only the solvent when recommended (maximum 5% of weight of A & B mix).

Mixing should not exceed 6 hours at 230C.

Màu sắc:

reddish-brown, ashen gray

Hàm lượng chẩt rắn:

min 55%

Tỷ lệ:

6 - 8 m2/ kg / 40μm (depending on surface conditions)

Độ phủ lý thuyết:

1.45 ± 0.05g/ml

Tỷ lệ trộn A/B:

10/1(by volume)

Độ dày màng sơn:

Wet thickness: 80-100 µm

Dry thickness: 40- 50 µm

TG khô(23°C):

Touchable dry 4h

Hard dry h

Thời gian phủ lớp kế (23°C):

Minimum after 6h

TG sống (sau trộn):

5 hours at 25oC

Chất pha loãng:


Sản phẩm liên quan

Liên hệ với chúng tôi

Sản phẩm mà bạn quan tâm

Tên sản phẩm: