CT4, Tòa nhà Vimeco, Nguyễn Chánh, Cầu Giấy, Hà Nội 
info@sbc-tt.com 
.png)
Textured Paint
Tư vấn sản phẩm
Liên hệ đại lýSP ® THANE POLYURETHANE 2K COLOR COATING
MSP:
Mô tả Sản phẩm
- Đặc tính
- Chuẩn bị bề mặt
- Thi công
- Good adhesion, excellent gloss and durability.
- The paint film is hard, tough and has good abrison resistance.
- Good tolerance under extreme weather, UV and corrosive chemicals.
- Excellent tolerance under acid, alkaline, gasoline, water.
- Can be used for heated surfaces up to 1000C (discontinuous)
The painting surface must be clean, dry, non-chalky and free from oil or any contamination.
- Stir the base part (part A) with a stirrer. Slowly pour the curing portion (part B) into container A at a ratio of 4 parts A and 1 part B. Stir evenly for 3 minutes until the mixture is homogeneous.
- Use only thinner when required (maximum 3% by volume of A & B mix).
- Mixing should not be left exceed 5 hours at 23oC.
- Cleaning tools and equipment after application with SPTHINNER 304.
| Màu sắc: | As request |
| Hàm lượng chẩt rắn: | min 50% |
| Tỷ lệ: | 8 – 10 m2/kg/40 µm (Depending on surface) |
| Độ phủ lý thuyết: | 1.25 ± 0.1 g/ml |
| Tỷ lệ trộn A/B: | 4 / 1 (by volume) |
| Độ dày màng sơn: | Wet thickness:80 – 90 µm Dry thickness: 40 - 50µm |
| TG khô(23°C): | touchable dry 4h hard dry 16h |
| Thời gian phủ lớp kế (23°C): | minimum after 6h |
| TG sống (sau trộn): | 5 hours |
| Chất pha loãng: | SP®TN304 |
| VOC: | Maximum 150g/kg |
.png )
