• CT4, Tòa nhà Vimeco, Nguyễn Chánh, Cầu Giấy, Hà Nội
  • info@sbc-tt.com
    • HOTLINE TƯ VẤN
    • Tư vấn kỹ thuật sơn: 0934518468 (Ms. Thoa)
    • Tư vấn bán hàng Sơn: 0973883409 (Mr. Quyền)
    • Tư vấn sàn sp deck: 0941460336 (Mr.Ninh)
    • Tư vấn tôn lợp: 0916688189 (Mr. Hiếu)
  • Việt Nam English

SP ® ZINS – 710 EPOXY HEAT - RESISANT RICH ZINC PRIMING PAINT

MSP:

Product Description

SP®ZINS - 710 is a two-component, self-curing, ethyl silicate zinc-plated primer. Bonded matt, flat, abrasion resistant, excellent weather resistance. Protect steel surfaces at high temperatures such as tanks, chemical compartments, chimneys... SP®ZINS - 710 is compatible with many coatings such as Epoxy, Silicone and Polyurethane.
  • High adhesion.
  • Durable with saline, petroleum, sea water, fresh water, chemicals in pH range 5-9.
  • High abrasion resistance.
  • High heat resistance. It can be used for heated surfaces up to 400 0C (discontinuous).

- For surface of new untreated steel: Grade of cleanliness is Sa 2.5 (ISO 8501-1: 1998). Mechanical cleaning up to the minimum standard of St2 (ISO 8501-1: 1998) may be acceptable depending on the intended use.

- For temporary primer-coated steel surfaces: The appropriate temporary primer coat surfaces should be  clean, dry, free from contamination and free of any foreign matter, such as oil and grease.

- For surface had old painting layer: The appropriate primer must be dry, clean and free from decomposition

  • Stir the A part by stirrer. Slowly pour part B into container has part A at a rate of 41 parts A and 59 parts

B.

  • Dry Film Thickness Reference:

Use as coating: 75 μm.

Primer for heat-resistant coatings: 30 - 50 μm.

  • Use only the recommended solvent (maximum 5% of weight of A & B mix). Mixing should not exceed 6 hours at 23 0C.

Sản phẩm liên quan

Contact Us

The product you are interested in

Product's name:

Code: