• CT4, Tòa nhà Vimeco, Nguyễn Chánh, Cầu Giấy, Hà Nội
  • info@sbc-tt.com
    • HOTLINE TƯ VẤN
    • Tư vấn sơn: 0934518468 (Ms. Thoa)
    • Tư vấn sàn deck: 0941460336 (Mr.Ninh)
    • Tư vấn tôn: 0916688189 (Mr. Hiếu)
  • Việt Nam English

SP®FLOOR-EFS COLOR COATING FOR EPOXY FLOOR

MSP:

Product Description

  • Good adhesion on metal and concrete surfaces.
  • Good resistance against abrasion, high physical impact, chemical.  Good color stability and ani-moss.
  • Extremely well heat resistance. Paint can be used for heated surfaces up to 100oC (non-continuous).

The painting surface must be clean, dry and free from oil, grease, other impurities and no chalking.
Please contact manufacturer for more info.

  • Stir the base part (part A) with a stirrer. Slowly pour the curing portion (part B) into container has part A

at a rate of 4 parts A and 1 part B. Stir evenly for 3 minutes until the mixture is homogeneous.

  • Use only solvent when required (maximum 3% by volume of A & B mix).
  • Mixing should not be left exceed 5 hours at 230C.

Cleaning tools and equipment after application with SPTHINNER 300 or SPTHINNER 305

Color:

As shown in color board

Solid content:

MIN 50%

proportion:

7-9 m 2 /kg/ 40µm (depending on surface condition)

Theoretical coverage:

1.12 ± 0.1g/ml

dried(23°C):

Touchable dry after 4hours

hard dry after 16hours

Time coating layer (23°C):

After 16h

Diluent:

solvent/cleaner

Sản phẩm liên quan

Contact Us

The product you are interested in

Product's name:

Code: