• CT4, Tòa nhà Vimeco, Nguyễn Chánh, Cầu Giấy, Hà Nội
  • info@sbc-tt.com
    • HOTLINE TƯ VẤN
    • Tư vấn sơn: 0934518468 (Ms. Thoa)
    • Tư vấn sàn deck: 0941460336 (Mr.Ninh)
    • Tư vấn tôn: 0916688189 (Mr. Hiếu)
  • Việt Nam English

SP®ETCH ACID PRIMER PAINT

MSP:

Product Description

  • Excellent adhesion on many surfaces
  • Does not contain heavy metals
  • Very fast drying
  • Excellent anti-rust feature
  • Good welding resistance
The painting surface must be clean, dry and free from grease and dust and other impurities.
Steel surface: remove oil by sandpaper # 80, remove rust by blowing sand if necessary.
Aluminum surface: remove oil and rust by sandpaper # 120 - # 180.
Galvanized steel surface: remove oil and rust by sandpaper # 180. 
·   Stir Part A thoroughly with a stirrer. Pour part B into part A container with the ratio of 3 parts A and 1 part B. Stir thoroughly for 3 minutes until the mixture is homogeneous. 
·   Allow the mixture to stand for 15-20 minutes, until it turns green to use it for construction. 
·   No dilution. 
·   The blended mixture should not be left exceed 8 hours at 230C.
 
Color:

Light yellow

Solid content:

min 25%

proportion:

5-8m2/kg/ 15µm (depending on surface condition )

Theoretical coverage:

0.9±0.05g/ml

Mixing ratio A/B:

3/1 (by volume)

Film thickness:

Wet thickness:  50µm

Dry thickness: 15µm

dried(23°C):

touchable 15 minutes

Time coating layer (23°C):

from 2hours to 4 hours

Time live (after mixing):

8 hours

Diluent:

SPTHINNER 007 or 015

Sản phẩm liên quan

Contact Us

The product you are interested in

Product's name:

Code: