Textured Paint
SP ® CRYL COATING PAINT ON STAINLESS STEEL GARVANIZED STEEL
MSP:
Product Description
- Characteristic
- Surface preparation
- Construction
• Flexible paint, very fast drying. Paint film is hard, glossy and has extremely good adhesion on many surfaces.
• Good welding resistance
• Excellent corrosion resistance
• Easy to apply
Surface preparation
The painting surface must be clean, dry and free from grease and dust and other impurities.
Steel surface: remove oil by sandpaper # 80, remove rust by blowing sand if necessary.
Aluminum surface: remove oil and rust by sandpaper # 120 - # 180.
Galvanized steel surface: remove oil and rust by sandpaper # 180.
• Stir well before applying. Only add up to 5% SPTHINNER 500 if necessary.
• If applying 2 coats of SP ® CRYL, coating time between two layers need to be at least 4 hours.
Color: | As shown in color board |
Solid content: | min 50% |
proportion: | 8 - 10 m 2 /kg/ 50µm (depending on surface condition) |
Theoretical coverage: | 1.12 ± 0.05g/ml |
Film thickness: | Wet thickness: 90µm Dry thickness: 50µm |
dried(23°C): | Touchable dry 30 minutes Hard dry 8h |
Time coating layer (23°C): | after 4h |
Diluent: | SPTHINNER 500 |